Okay, so after a year of designing and building, I'm finally finished with my control room. To my ears it sounds far superior to any other "control room" I've had in the past, but I wanted to get some input on the actual test graphs from Fuzzmeasure.
Info about the room:
Dimensions: 14'L x 12'W x 9' H
I attempted to create an RFZ by placing 4"-thick, 3'x2' (HxW) panels in the front corners, and 2'-thick 3'x2' panels on the side walls just in front of the mix position, as well as a 2"-thick 4'x2' panel on the ceiling, again just in front of the mix position.
The floor is carpeted with no padding underneath.
Anyway, here is the graph:
The green graph represents the left speaker, the blue represents the right. The test was done with the flattest mic I have (an AKG C 414 EB set to omni).
Anyway, I really have no way of interpreting this graph... it looks pretty flat to me, although the lowest mode of the room (around 40Hz) and its 1st and 2nd harmonics seem to be a bit high, which I kind of expected. But I want a second opinion! Does this look good? Bad? How can you tell? Thank you for your time!
-Jesse