View Single Post
Old 13th November 2009   #23
Etch-A-Sketch
Lives for gear
 
Join Date: Jan 2009
Location: Los Angeles, CA
Posts: 941

Quote:
Originally Posted by Big Andy View Post
Now on to business, I tested out my A7s running a frequency sweep slowly from 1000 down to 20Hz. Once I got below 50Hz I got a very slight push pull feeling. Hardly enough for me to pick up. But no distortion. The Push Pull is a bit of an issue, but not enough for me to go out and buy new monitors. It sounded plump and round. I got a nice surprise while doing this though. I found that the freq response stuck around until about 27Hz. NICE
Awesome! thanks andy for taking the time to do that. I'll have to get a pair in here to check out again. I loved the tweeter. thanks!
__________________
Derek Jones
Audio Engineer - Producer - Composer
http://www.myspace.com/daogkilla
http://www.linkedin.com/pub/derek-jones/8/986/9b9


"We were working on Raiders [of the Lost Ark]. He [Ben Burt] told me that the sound source for opening the lid of the ark in the last reel was within 20'. I couldn't figure it out. It turned out to be lifting the back off the toilet above the water chamber, and slowing it down." -Tomlinson Holman
Etch-A-Sketch is offline   Reply With Quote