Gearslutz.com - View Single Post - placing absorbers and building the frames

guitarguy1555 · 10th November 2009, 04:29 PM

this is what i was thinking

front wall- A- 2x4 4in half way up the wall in corners,
B- (3) 2 x 2 2in panels evenly spaced over head
C- 2in 2x4 on the window corner

side walls- A- 2 x 2 2inch at first reflection points
B. 2 x 2 4in halfway back ceiling/side wall corner
C. 2 x 2 2inch side wall little further back from that

"first back wall"
A. 2 x 2 4 in tv ceiling corner
b. 2 x 2 2in behind tv
c. 2 x 4 2in gobo in front of door, - i may make this one a hinged thing for a portable vocal booth type deal that i can use for that and in front of door when mixing

d. (3) 2 x 2 2in evenly spaced overhead one of them will be back in that well/ back corner thing.

back corner
A. 2 x 4 4in gobo for door corner
B. 2 x 2 2in - either on back wall or back wall ceiling corner

-does that plan seem most effective or would i be better of using more panels going floor to ceiling on the front wall?

note- i am hoping to be able to do tracking in this room as well. ill buy some plywood or something for a reflective surface. then i have that bathroom and then a good portion of the rest of the house is hardwood floors, but i think at a minimum should be able to get a good electric and vocal in here.

10th November 2009, 04:29 PM	#5
guitarguy1555 Gear Head Join Date: May 2009 Posts: 74	this is what i was thinking front wall- A- 2x4 4in half way up the wall in corners, B- (3) 2 x 2 2in panels evenly spaced over head C- 2in 2x4 on the window corner side walls- A- 2 x 2 2inch at first reflection points B. 2 x 2 4in halfway back ceiling/side wall corner C. 2 x 2 2inch side wall little further back from that "first back wall" A. 2 x 2 4 in tv ceiling corner b. 2 x 2 2in behind tv c. 2 x 4 2in gobo in front of door, - i may make this one a hinged thing for a portable vocal booth type deal that i can use for that and in front of door when mixing d. (3) 2 x 2 2in evenly spaced overhead one of them will be back in that well/ back corner thing. back corner A. 2 x 4 4in gobo for door corner B. 2 x 2 2in - either on back wall or back wall ceiling corner -does that plan seem most effective or would i be better of using more panels going floor to ceiling on the front wall? note- i am hoping to be able to do tracking in this room as well. ill buy some plywood or something for a reflective surface. then i have that bathroom and then a good portion of the rest of the house is hardwood floors, but i think at a minimum should be able to get a good electric and vocal in here.