Quote:
Originally Posted by mala gaitix  What is the best way to work with all this stuff?? |
Any way you would like, there is no rules it's what works best for you.
Quote:
Originally Posted by mala gaitix -making the drums and sequencing with the akai |
You can sequence the ASR-10, and soft synths in logic from the mpc if you want to work that way as well. I would make sure to have moth the ASR-10 and MPC connected via MIDI to the Mac/Logic so you could use the ASR-10 as a controlling keyboard, and the MPC 's Pads as well. This may require more Midi I/O to you computer.
Audio to your MOTU (not sure what you have)
Again many ways to do this and use this stuff.
Quote:
Originally Posted by mala gaitix -and if i sampling a vynil with the asr-10 to pass the sound then to the akai how i do? via record input? via midi?
-and if i play a bass instrument with the asr-10 i also pass then to the akai o i put it directly to the logic via motu? |
MID is just digital 1's and 0's simply put it's mostly note on and note off. It expands more than that but for now thats a good explanation.
To sample to either your ASR-10 or the MPC, It may be best to get a DJ mixer with a couple sets of outputs. I have a older one that has monitor and main outs, and you can switch them in and out. Set the table to the DJ mixer's Record player RIAA input, and set the MPC on one output and the ASR-10 on the other. The headphone jack could also work.
Regarding Bass notes... Don't know what MOTU you have so it's had to guess, unless your sampling it on the MPC or sequencing it on the MPC then the MPC is not evolved.
Kaz