Quote:
Originally Posted by PaulP  I was going to say the same thing, get a block of wood in there behind the mitre gauge fence
or you may regret it. Especially since your blade is way high. My neighbour cut off three fingers
just after retiring and setting up a full workshop in his garage. Put an end to that dream.
Other than that great post. Thanks for sharing. Hope you find your way forward.
Paul P |
Actually, I don't go all the way through the miters fence. I did once when I squared up all the material, but after that I glued and stapled another 1/4" panel about 4" forward of the fence. The only area that I'm in danger right now, is holding the material to the jig and running it past the blade.
Thanks for the consideration though. An extra set of eyes is always good!
Terry, I follow most of what you're saying. I'll look into making a spacer somehow to widen the slots. Otherwise, I may have to scrap this for a bit. I'm expecting delivery of my 21" sub driver today, so I'm probably going to get working on that this afternoon.
G.E. I love your thread on all your diffusers...it's part of what inspired me to jump into this project. Great photos in that thread by the way! I would love to see more!