Gearslutz.com - View Single Post

boojum · 9th November 2009

Guys, the deal is that I have tried the arrays and they just cannot get the group without the clatter surrounding them. Williams has a cardioid array for 180 degrees of 12 cm apart and ~58 degrees angle of separation between the cards. I will run this in parallel with the Blumlien and hang it int eh center of these guys, above the square table and a little above head height. There has to be a solution. I could run MS, too, just to see how they all compare. But MS has not been a solution in the past as its effective angle when decoded is too narrow, not at all unlike an XY array.

Thanks for all the input. This board is the best.

Dave's suggested links were interesting and one was actually good. But I had asked for experience on this board. I know how to Google. ;o)

Cheers.

9th November 2009	#7
boojum Lives for gear Join Date: May 2007 Location: Astoria, OR, US&A Posts: 2,137 Thread Starter	Guys, the deal is that I have tried the arrays and they just cannot get the group without the clatter surrounding them. Williams has a cardioid array for 180 degrees of 12 cm apart and ~58 degrees angle of separation between the cards. I will run this in parallel with the Blumlien and hang it int eh center of these guys, above the square table and a little above head height. There has to be a solution. I could run MS, too, just to see how they all compare. But MS has not been a solution in the past as its effective angle when decoded is too narrow, not at all unlike an XY array. Thanks for all the input. This board is the best. Dave's suggested links were interesting and one was actually good. But I had asked for experience on this board. I know how to Google. ;o) Cheers. __________________ Nov schmoz kapop.