| Pic 1: The console is taped and protected, and partially sanded.
Pic 2: Finishing sanding the board.
Pic 3: One of the contractors installing the sliding glass doors. You can see where we had to replace some of the hardwood floor boards because the old ones were not going to cut it.
Pic 4: One coat of stain on the console. Still sitting in the kitchen, waiting for us to finish the control room for it.
Pic 5: Another view of the new wall and sliding doors. This pic is taken from the control room, looking into the tracking room.
Pic 6: Tracking room floor. That glue is thick, and the sander we rented would not take it off... it simply heated the glue and jammed the sand paper so it would do nothing. The partially cleared part of the floor is where I manually scraped the glue off with a hand scraper and some solvent. It's gonna be a long week. |