You will need a different adaptor cable.
You will need a mini-jack to two XLR-3F connectors.
Tip wired to pin-2 of one XLR and ring to pin-2 of the other. Screen connects to sleeve and pin-1 of the XLRs - XLR pin-3 is connected to pin-1 in the same XLR.
BUT
You will need blocking capacitors in the XLRs to prevent the plug-in power put out by thr LS-10 getting into the dynamic microphones.
You just use standard XLR-3F to XLR-3M mic. cables to go fro the mics to the adaptor.
|