Gearslutz.com - View Single Post - Airshow Mastering New Studio Construction
View Single Post
Old 13th October 2009   #74
Airshow Mike
Gear Head
 
Joined: Jul 2008
Location: Virginia
Posts: 64

Thread Starter
While the fabric was going up in the Tracking and Control Room, Sam, Charlie, Frank, and I were in my room with our construction managers taking a preliminary listen. Charlie brought his little Genelecs so Sam could run some pink noise. I brought my Sterling Modular desk in so I could get a feeling for where I will be sitting. If you look at the photos, you will notice the desk is not totally assembled. The sides are off and so is the granite arm rest.

Sam was using Smaart with an Earthworks mic to analyze the room. The pink noise and music were being fed to the Gen's through Charlie's Metric Halo ULN2.

Sam had me sit in the middle, approximately where my chair will be. It was incredible!
The sweet spot was huge. In fact you can walk from one side of the room to the other with essentially no drop off points. Everyone had a big smile on their face.

Later Sam had our construction manager James and me hold up the cloud to eyeball the positioning ( I'm on the right).

I am really looking forward to working in this room.

-Mike
Attached Thumbnails
Airshow Mastering New Studio Construction-dsc_8998.jpg   Airshow Mastering New Studio Construction-dsc_9005.jpg   Airshow Mastering New Studio Construction-dsc_9009.jpg   Airshow Mastering New Studio Construction-dsc_9023.jpg   Airshow Mastering New Studio Construction-dsc_9029.jpg  

Airshow Mastering New Studio Construction-dsc_9058.jpg   Airshow Mastering New Studio Construction-dsc_9062.jpg  
Airshow Mike is offline   Reply With Quote