Quote:
Proper fuses will blow on the 250W amp, too.
This means that you will never use the extra "250W" of the 500W amp.
|
Wait, so what you're telling me is that if i decide to get fuses i will be better off with the 250w anyway?
Quote:
|
Seriously, how loud ARE you going to be running them?
|
Actually not that loud. What i am worried about the most is the distortion at low levels/crank up volume wearing and tearing.
People use 150w per channel with NS10m and run them fine, or so they say.. thats why i though 500w would be meaningless and i wouldn't notice a big difference from 250 > 500.
I am not going to play them LOUD AS HELL. I read that mixing in low volumes on the NS10 can be a good thing so most of the time i will play them at "medium" volumes.
Quote:
The aprox. 90dB sensitive speaker will hit about 113dB at 1 m which is enough for most work and that is what 200W will give you.
Possibly you don't want to run this particular speaker at those level due to excessive distortion.
|
You mean distortion by clipping (overpowering) or distortion (underpower)?
Ok, now im back to being torn between the two amps again.. Thanks lots!
leaning towards the 250w amp now.... . HALP!