Quote:
Originally Posted by chribble  bill I'm getting RF problems with my mic again
Would you care to take a photo of the fix you have done just so I make sure I am doing it correctly?
Thanks |
Hi Chris,
not where I can get to those cables and a camera, All I can say is, the M end of the mic cord is normal, the F end that plugs into the mic is what gets modded.
On a SWITCHCRAFT type plug (not sure exactly how neutriks are set up right now...) pins 2 & 3 are connected as per normal. Pin 1 - ground - is DISCONNECTED from pin 1 and is soldered to the little loop tab that sticks out and is connected to the chassis / setscrew. Hope that helps.
bp