Thanks for the input guys.
Ethan, The closet's full of gear, manuals, tools etc. But the idea of leaving the doors open and putting two traps in front sounds intriguing.
I realized that a stand by the door is probably my best option but I'm also toying with the idea of mounting a corner trap on a hinge on the right wall that I can swing out of the way when the door is open. Any thoughts?
Glenn, I was under the impression that corner traps had to be at a 45 degree angle to be effective. Would a narrow angle as you suggested work as well?
On a different note, would a 414B ULS set in omni mode work as a measuring mic?
I'm off to
J&S Supplies here in Brooklyn to look at panel materials. They've got a good deal on 703 2" ($48 a box
), but I'm going to check out some rock wool as well. I'm on a bit of a tight budget.
Once I get going I'll post some pictures.
Thanks again for the advice! There's so much good info on this forum. Spent hours going through it and digesting....
You guys rock. stike