Quote:
Originally Posted by stripey  Has anyone from A&H (i.e. Mike!) posted the instructions - either here or elsewhere - as to how to convert the FX sends to four post-fader auxes? That's the only way I'd need to use them for mixing, nothing else.
Also, I gather it's an inside job, but I don't know one end of a soldering iron from the other. How complex is it, does it void the warranty and can the process be easily reversed?
By the way, are the four sends all stereo? I have one mono reverb unit and was wondering how best to hook that up for select channels. I'd have one stereo reverb/delay unit, a mono-mono reverb and hopefully a couple of guitar FX pedals (mono) available as well, via a Little Labs reamp box.
Is this possible on the R16, assuming the post-fader soldering has been done right? What's the total channel count for sends - four stereo or eight mono?
Thanks to EVERYONE that's contributed to this thread! It's the single greatest resource on the Zed R16 on the whole goddamn internet! |
If you have no soldering experience , don't do it !
I had to fix an issue on my R-16 because a couple of grounding resistors did'nt make it on the circuit board. Mike gave me the option because, in my line of work I solder stuff all the time, and the warranty was'nt voided.
I think it would be on a case by case basis but I would'nt recommend it,
saying that the Aux send mod Mike said would be possible is probably
not an easy one and would probably need to be done by a bench tech.
No info has been posted about this mod.
The R-16 has 4 mono auxes ( FX send/returns ) to get stereo you use 2 mono auxes
Cheers
LK