| Dattorro Algo "Expert Reverb"
Here are some examples of the Dattorro Algo in the form of the ENSONIQ DP/PRO "Expert Reverb".
These are some basic examples to illustrate the difference between the FDN of the Expert Reverb 1 and Expert reverb 2 variations.
In all examples the Expert Reverb 1 is mono panned left and the Expert reverb 2 is mono panned right.
The DP/Pro is a dual processor device so these are simultaneous yet uncompromised iterations.
In these examples you will hear the two reverbs with only the following parameters altered: "Diffusion" (Input diffusion) and "Density" (tank diffusion).
Diffusion 100% Density 100%
Diffusion 0% Density 100%
Diffusion 100% Density 0%
Diffusion 0% Density 0%
The input diffusors, normally 6 left and 6 right in the stereo routing configuration, are combined in the mono routing and are also identical in each algo.
In other words, in this "Dual Mono" routing configuration these "Left" and "Right" diffusor chains are combined in parallel and so are identical for both of the inputs.
"L"
4.2ms
5.7ms
13.1ms
18.5ms
23.4ms
20.0ms
"R"
16.2ms
9.9ms
6.0ms
8.0ms
10.0ms
12.0ms
The 8 Tank Delays are identical for each algo and set as follows:
47.0ms
97.0ms
181.0ms
77.7ms
141.0ms
61.0ms
177.0ms
31.0ms
Reverb time is set to 4.5 seconds with HF damping at 11khz.
PLEASE NOTE: The only difference between the reverb you hear on the left side and the one on the right is in the delay matrix routing in the reverb tank. |