Gearslutz.com - View Single Post

muddy · 3rd July 2009

this is probably a completely dim bulb question, b-u-u-u-t..... can you wire 2 of these, in whatever number of parallel/series, & reversed configs, in order to match the 10468's spec's, so i can use 'em for a 1073-style mic input? or (using 1 reversed, ala 31267 as per jlm's solution), can the -3db gain be made up with a diff choice ic/opamp than the tl072cn that's currently in there? also, do you think mounting these externally/internally on ceramic sockets (if those are what you'd in fact use) is a good idea? and lastly, pin config aside, would one of these suffice as a replacement for the 2nd line input tranny? otherwise, maybe someone here has a 10468 they'd care to trade?

ml

3rd July 2009	#1
muddy Gear addict Joined: Jul 2002 Location: N.Y.C./L.I.C. Posts: 499 Thread Starter	Marinair 10368 Trannies (round/octal) this is probably a completely dim bulb question, b-u-u-u-t..... can you wire 2 of these, in whatever number of parallel/series, & reversed configs, in order to match the 10468's spec's, so i can use 'em for a 1073-style mic input? or (using 1 reversed, ala 31267 as per jlm's solution), can the -3db gain be made up with a diff choice ic/opamp than the tl072cn that's currently in there? also, do you think mounting these externally/internally on ceramic sockets (if those are what you'd in fact use) is a good idea? and lastly, pin config aside, would one of these suffice as a replacement for the 2nd line input tranny? otherwise, maybe someone here has a 10468 they'd care to trade? ml __________________ when the tides of life turn against you, & the current upsets your boat, don't waste those tears on what might have been, just lay on your back & float... "no, no, you're all confused. it's not the sun that's goin' down, it's the hori-ZON that's movin' up!" - firesign theatre "...i don't possess a mansion, a villa in france, a yacht, or a string of polopponies." - E.N.