Gearslutz.com - View Single Post

genelec79 · 3rd July 2009

Hi guys. I was lillte sleepy yeterday when i wrote previous post!!! In this calculator for the Panel absorber i was able to fill all of this datas (panel 1 m2,depth the space behind 35 cm ,diameter of holes 1 cm, amount of holes 50 and than the calculator shows me that target frequency for this combination is 40 HZ WITH PERFORATION PERCENTAGE 0.39. So does this play any important role(perforation percentage of 0.39),cause i allready tipe the number of holes,OR IS IT JUST A CALCULATION OF MY DATAS?? THANKS GUYS FOR SUPPORT!

3rd July 2009	#4
genelec79 Gear Head Joined: Aug 2007 Posts: 32 Thread Starter	Hi guys. I was lillte sleepy yeterday when i wrote previous post!!! In this calculator for the Panel absorber i was able to fill all of this datas (panel 1 m2,depth the space behind 35 cm ,diameter of holes 1 cm, amount of holes 50 and than the calculator shows me that target frequency for this combination is 40 HZ WITH PERFORATION PERCENTAGE 0.39. So does this play any important role(perforation percentage of 0.39),cause i allready tipe the number of holes,OR IS IT JUST A CALCULATION OF MY DATAS?? THANKS GUYS FOR SUPPORT!