Quote:
Originally Posted by Ashermusic  1. Not if you set the Preference properly. Go to Preferences > Audio > General and where it reads Track Mute/Solo, set it to Faster (Remote Channel Strips and muting in the Arrange or the Mixer will mute the Channel Strip itself and therefore all tracks going to it. The setting CPU=saving (Slow Response) allows them to be independent of each other, which is what I prefer personally.
2. You just don't understand it well enough yet. It is very different from PT.
3. Logic will however do automatic sample rate conversion when you bring a file into the Bin if you have the setting as follows:
The “Convert audio file sample rate when importing” project setting must
be active for automatic sample rate matching. You can turn on this setting in the File >Projects Settings > Assets pane.
.... |
Aha - super cool! Thanks!
This is why GearSlutz is great - people helping people learn good stuff. Much appreciated!!
While I have you on the line.... my biggest beef of the change from Logic 7 to Logic 8 is that (it is my understanding) that the limited ability to import session data from one session to another was removed.
I DONT mean channel strip settings.... I mean routing / many auxes / elaborate setups.
Any tips?
thanks
