Quote:
Originally Posted by mixerguy  I'm not talking about 'recordings' made with microphones ..... I'm talking about loops, synths, all manner of musical audio that you can imagine...... FYI.  |
Ok now i understand you are talking about Instrument channel strip!
try this... : just route stereo instrument on single mono AuxBuss by using sends... (if UTM is ON)
or if you are able to uncheck UTM (this set can be dangerous for the song that was started with UTM ON and are in working progress, but you will be also able to route on bus 1-2 3-4 5-6 and so on... this configuration is allowed only with UTM off
just use mono Aux channel strip and you will be able to use individual pan for left and right side of your instrument track.
G