Gearslutz.com - View Single Post - Angles of Control Room walls
View Single Post
Old 23rd June 2009   #144
Bassmankr
Lives for gear
 
Joined: Jul 2005
Posts: 1,907

Spent an hour refining the plan, I'll see if I can scan it and post. Got the control room more front end width, more volume,symetrical NON-parallel walls, by lengthening the splay length from 8' to 11' and spining the room clockwise a bit so the east splay is against the outside wall. I adjusted the other rooms accordingly. Looks like rough average sizes are 12 x 16 for Control, 7 x 9 for Iso, 12 x 16 for Live, 4 1/2 x 7 1/2 for HVAC, and a functioning Bath layout/size. Added best places/sizes/swings for interior doors. Figuring the windows/sightlines and exterior door (best is into Live room) is up to you. Didn't read all the posts as I chimed in late, given the dimensions you listed I'm assuming you are converting a two car garage? Since this is probably a common size/garage conversion for others to follow suit that's why I put the time in it. Hopefully you can refine it as I'm sure you will share the details (I just did a rough layout, 6" dimension snap).
Bassmankr is offline   Reply With Quote