Quote:
Originally Posted by AlienHealth  Hi B,
I think LK has confirmed that this is possible already, but yes you can synchronise the ZED-R16 to clock from the ADAT input. Actually the clocks will still be generated by the low jitter JET PLL generator, but sync'd to the ADAT in.
You'll need the latest firmware in the mixer to remember to sync from ADAT on power up, but you'll want this anyway because the L/R I/O is available at 96kHz sample rate (FireWire mode only).
BTW the sample rate in ADAT mode is fixed at either 44.1 or 48kHz.
Cheers,
Mike. |
Hello Mike
Yep - Lovekrafty did a great job and should be on the payroll!
Thanks for the additional confirmation, it always adds a huge amount to the buying process when the manufacturer has confirmed an area that the buyer is a little concerned over - particularly when it's one of the key reasons for buying!
I don't record over 44.1, so that's not a problem - and my understanding of the Apogee is that it works on the same basis if using the ADAT connection as well as the normal in's.
OK off to buy. Will let people know how I get on once it's here.