Gearslutz.com - View Single Post - Angles of Control Room walls
View Single Post
Old 17th June 2009   #123
naethoven
Gear addict
 
naethoven's Avatar
 
Joined: Jul 2007
Posts: 337

Thread Starter
Sure! Here's the whole design, the CR is the only room I've really fleshed out so far.

Jay, I didn't show any acoustic treatment in that last post, but I still plan on having bass trapping in the front corners. I will have quite a few traps: a large one in the ceiling/wall corner in the front of the room, going all the way across the room; all four wall/wall corners; plus a cloud hanging at an angle (2ft from the ceiling at low point) that may extend over most of the room. That's just my ideas for now. Meanwhile, the front wall of the room will be absorptive at 1st reflection points.
14 ft or so is really the only width I have to work with, and that is why I was so aggressive with the angle this time. Suggestions on how to deal with that?

Thanks a lot guys

P.S. I marked the distance of the Rt speaker to the Rt wall (just above it in the pic) to make it easier to judge how far away it is.
Attached Thumbnails
Angles of Control Room walls-cr-1-1.4-1.8-entire-studio.jpg  
naethoven is offline   Reply With Quote