Gearslutz.com - View Single Post - Using a Multi-Meter to calibrate DA

tINY · 1st September 2005

For a hand-held meter, check the spec. A lot of the true-RMS handhelds are only accurate to around 200 or 500 Hz. That's plenty for troubleshooting any power system and that's what most of them get used for.

-tINY

1st September 2005	#7
tINY Gear Guru Join Date: Jul 2004 Location: Orygun Posts: 10,205	For a hand-held meter, check the spec. A lot of the true-RMS handhelds are only accurate to around 200 or 500 Hz. That's plenty for troubleshooting any power system and that's what most of them get used for. -tINY