Gearslutz.com - View Single Post

dale116dot7 · 14th April 2009

All of these are a size of 33 metres (100 ms shortest delay).

New Page 1

2 = just some random settings, input diffusion set on
3 = super long RT
4 = super long RT with chorus at 3.25 Hz (default is 0.27 Hz)
5 = similar to 4, chorus adjusted
6 = no input diffusion, chorus at 1 Hz
7 = no input diffusion but a 3-tap multitap at around 0, 18, 25, 32, 45ms ahead of reverb
8 = reasonable RT and level, 'close' settings
9 = what we're starting with (dry)

You probably want to be on DSL or other highspeed, I left them as WAV so you would not hear any of the funny MP3 processing that's pretty obvious.

The input diffusion is covering up a ringing that I don't like. I think I was battling the 'loop' sound and didn't quite catch that. I have to move a tap or two in the output section, I would like to try 5 again after some more tuning of the output tap locations. A problem I have is moving an output tap on the fly and doing a chorus at the same time. It can be a bit tricky. Usually I take an output tap and just have a separate chorus delay line area, it's much easier to deal with resizing in the user interface to DSP interface.

14th April 2009	#57
dale116dot7 Lives for gear Joined: Dec 2003 Location: Calgary, Alberta Posts: 816 Thread Starter	All of these are a size of 33 metres (100 ms shortest delay). New Page 1 2 = just some random settings, input diffusion set on 3 = super long RT 4 = super long RT with chorus at 3.25 Hz (default is 0.27 Hz) 5 = similar to 4, chorus adjusted 6 = no input diffusion, chorus at 1 Hz 7 = no input diffusion but a 3-tap multitap at around 0, 18, 25, 32, 45ms ahead of reverb 8 = reasonable RT and level, 'close' settings 9 = what we're starting with (dry) You probably want to be on DSL or other highspeed, I left them as WAV so you would not hear any of the funny MP3 processing that's pretty obvious. The input diffusion is covering up a ringing that I don't like. I think I was battling the 'loop' sound and didn't quite catch that. I have to move a tap or two in the output section, I would like to try 5 again after some more tuning of the output tap locations. A problem I have is moving an output tap on the fly and doing a chorus at the same time. It can be a bit tricky. Usually I take an output tap and just have a separate chorus delay line area, it's much easier to deal with resizing in the user interface to DSP interface.