Gearslutz.com - View Single Post - Changing Control Room Ratios (plus a parallel wall question)

Seamus TM · 25th February 2009

A-ha.
That's great info.

I suppose that rooms that are deeper than the 20 ft would be fine at the 1/4 wave but the 3/4 wave would start to move down, as well, making it more difficult to treat... right?

So, would that be based on the speakers being pretty close to the front wall?
I noticed that you use a lot of soffit designs in the studios that you work on.

Thanks again, Wes.

25th February 2009	#18
Seamus TM Lives for gear Joined: Aug 2004 Location: Upstate NY Posts: 1,602 Thread Starter	A-ha. That's great info. I suppose that rooms that are deeper than the 20 ft would be fine at the 1/4 wave but the 3/4 wave would start to move down, as well, making it more difficult to treat... right? So, would that be based on the speakers being pretty close to the front wall? I noticed that you use a lot of soffit designs in the studios that you work on. Thanks again, Wes. __________________ Seamus Upstate New York