|
If it helps, I found this...
Performance Specifications
Microphone Inputs 1-2
Frequency Response: 20Hz - 20kHz +/- 0.1 dB
Gain Range: +13dB to +60dB
THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter)
Noise EIN: 128dB analogue to digital (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)
LIQUID TECHNOLOGYTM Mic-amp emulation*
Input Impedance: variable, set in software by pre-amp emulation chosen
Harmonics Distortion Range: 0 to 15 where maximum (15) = 10% of 2nd-, 20% of 3rd- and 10% of 5th-order at 0dBFS (level-
dependant distortion)
Microphone Inputs 3-8
Frequency Response: 20Hz - 20kHz +/- 0.1 dB
Gain Range: +13dB to +60dB
THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter)
Noise: EIN: 128dB analogue to digital (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)
Input Impedance: 2k ohm
Line Inputs (Inputs 1-8)
Frequency Response: 20Hz - 20kHz +/- 0.1dB
Gain Range: -10dB to +36dB
THD+N: < 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter)
Noise: -90dBu (22Hz/22kHz bandpass filter)
Instrument Inputs (Inputs 3 and 4 only)
Frequency Response: 20Hz - 20kHz +/- 0.1dB
Gain Range: +13dB to +60dB
THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter)
Noise: -87dBu (20Hz/22kHz bandpass filter)
Analogue Audio Outputs (Outputs 1-10)
10 Electronically Balanced Outputs
Maximum Output Level (0dBFS): +16dBu
THD+N: 0.001% (0dBFS input, 20Hz/22kHz bandpass filter)
• Digital Performance
A/D Dynamic Range = 110dB (A-weighted), all inputs
D/A Dynamic Range = 110dB (A-weighted), all outputs
Clock Sources:
Internal Clock
Sync to Word Clock on SPDIF Input (RCA)
Sync to Word Clock on optical SPDIF Input (when enabled)
Sync to Word Clock on ADAT input 1 or 2
Sync to Word Clock on BNC Word Clock Input
JetPLLTM PLL technology providing superb jitter reduction for class leading converter performance.
Clock jitter:250 picoseconds
Supported Sample Rates
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz and 192kHz
|