Quote:
Originally Posted by LeMauce  BTW are you sure that you put in the options the I/O safety bumper on, Process Buffer Ranger: High, Recording delay @ 1Ms... (so your sure that the signal before recording is send properly). I/O buffer size to 32ms>?
And in "generel" tab in audio. Compensation set to ALL + Low latencymode plus the limit to 1ms (same as recording delay).
I have this setting and it works 99 out of 100 |
LeMauce...thanks for the feedback. In regards to the settings.
• I usually do
not have the I/O buffer
on. I will mess with this today, and see how this effects matters.
• I will sometimes work at the buffer of 64, but usually it's at 128. Using the UAD-1 usually forces me into that. I don't think I ever even tried to work at 32 samples since it's not entirely practical for most of my session. I do use low latency mode for tracking, and that's never really been an issue with me.
• Compensation is always set to ALL