Hey guys,
I've just recently purchased an RME ADI-2 which sounds awesome however I'm having trouble getting my
http://www.m-audio.com/products/en_us/Delta1010LT.html M-Audio Delta 1010lt to receive the S/PDIF coaxial signal from the
ADI-2 http://www.rme-audio.de/en_products_adi_2.php
~The ADI 2 is receiving the signal from the mixer via 2 xlrs fine and its showing on the LED's however the signal is not showing on
any of the channels on the M-Audio card despite me setting the default recording device as S/PDIF. I'm expecting the signal to show up under "H/W in S/PDIF" but theres nothing there and everything is unmuted.
The signal chain is currently
MIXER XLR MAIN MIX STEREO OUTS-> ADI-2 XLR INPUT-> ADI-2 S/PDIF OUT (via RCA PHONO)-> Delta 1010lt S/PDIF IN (VIA RCA PHONO) to hopefully show up on
"H/W in S/PDIF" on the m-audio software.
However, playback is fine and sends the signal back via S/PDIF into the ADI-2 and out through 2 xlrs no problem, with the exception of the D/A monitor knob only changing the headphone out level and not the XLR out volume.
If anybody could help or is familiar with either or both of these devices would be much appreciated.
Thanks
Ash