| Latency measured
Sent a 20ms sine test tone, level set to 100% out just now, and the latency is exactly 3ms, just like the creamware software said it would be. However, the AD/DA is able to output the tone just fine without distorting its output, but it distorts on the input... seems like a bad design to me, creating a AD/DA that is able to output more than it is able to receive at its input, unless there is some way to calibrate input/output. There is certainly no such option on the AD/DA box itself, and I know the creamware scope software pretty well, and haven't seen such an option.... I will try to figure out if it is at all possible to calibrate input/output... in the meantime, if anyone here is a 2496 user, or has any other idea that I might try, please let me know....
Will also try to borrow another converter from another studio to see if the signal degradation is simply because the 2496 doesn't have good enough converters to implement hardware devices in the signal chain... |