|
ok so now that we have a bit on the mics and where to put them,what about getting the phase correct......
we will use this situation so we are all on the same page.
you have 1 4x12 cab and its close mic'd up with these 2 mics;1 sm57 and 1 md421.
there is no ibp either. all you have are 2 mics into 2 pres.
how do you go about getting these in the best phase relation?
i have heard of people talking about moving mics around until the "hiss" drops out.
can someone explain how to do this?
i have also heard people say that as long as the 2 mics are close up on the grill,you need not worry about phase.
are there other methods?
|