Quote:
Originally Posted by down&down  Yeah that's what I would suspect too. It was weird though that I got different levels from the Output and the Send. I would think that the signal at the Send hits everything that the signal at the Output hits, but they sounded different. Very strange. So do you think I could go from the M80 Sends to the ACP88 Inputs and then from there into my 002 rack and skip going back into the M80 via the Returns? I feel like such a goof for asking that question. I felt like I had a pretty good handle on what I was doing until I ran that little test today. Snatchman, I'm just curious as to how you found the ACP88. I just got mine in the mail and have yet to give it a go. Thanks again! |
Hello. Did you try the -10/+4 button on the back of the ACP-88? Just me, but why not come out of the output of your M-80 in-line into input of the ACP-88. I thinkthere may be a level difference in the send/return impedeance compared to the line input/outputs. As far as the sound of the ACP-88, I found it ok. Don't hit it to hard or the signal seems to get " small" quick. The only other thing I found was the fan was noisey. ( if using in a control room, should be ok live).. Good luck..