Gearslutz.com - View Single Post - Proper way to transfer digital signal via RCA SPDIF? Why am I getting "clicks"?

Baithak · 29th September 2008

I have had similar problems with Spdif transfers mainly Tascam DAT machines and occasionally the SD 744 in transferring to the Masterlink. I have had success if one of the machines does not operate on mains power and is operating on batteries. I don't exactly know why this has been the case but once the mains power (wall wart) is disconnected the clicks have disappeared.

Good luck,
Baithak

29th September 2008	#6
Baithak Gear maniac Joined: Jan 2006 Location: Pune, India Posts: 270	Run the Tascam on batteries I have had similar problems with Spdif transfers mainly Tascam DAT machines and occasionally the SD 744 in transferring to the Masterlink. I have had success if one of the machines does not operate on mains power and is operating on batteries. I don't exactly know why this has been the case but once the mains power (wall wart) is disconnected the clicks have disappeared. Good luck, Baithak