Gearslutz.com - View Single Post

Ermz · 23rd September 2008

Well so far I've narrowed it down to 3 manufacturers, and 3 different products:

Tontine Acoustisorb3: Tontine AcoustiSorb (pg6)

Insulco Semi-Rigid (John Sayers seems to like this one): http://www.insulation.com.au/INSULCO...Semi-Rigid.pdf

And also the Bradford Fibertex350 which has been mentioned in some other threads here on the front page: http://www.bradfordinsulation.com.au...6f18d60b4a.pdf

None of it seems to perform quite as well. The Fibertex is extremely expensive, I'm concerned that the Insulco Semi-Rigid isn't rigid enough to stand without chicken wire (big problem for us as we want to make many panels quickly) and the Acoustisorb is polyester-based, which I haven't read much about in regards to effectiveness. From what I gather most people still prefer fiberglass for pure performance?

Thank you for the reply.

23rd September 2008	#3
Ermz Lives for gear Joined: Feb 2006 Posts: 705 Thread Starter	Well so far I've narrowed it down to 3 manufacturers, and 3 different products: Tontine Acoustisorb3: Tontine AcoustiSorb (pg6) Insulco Semi-Rigid (John Sayers seems to like this one): http://www.insulation.com.au/INSULCO...Semi-Rigid.pdf And also the Bradford Fibertex350 which has been mentioned in some other threads here on the front page: http://www.bradfordinsulation.com.au...6f18d60b4a.pdf None of it seems to perform quite as well. The Fibertex is extremely expensive, I'm concerned that the Insulco Semi-Rigid isn't rigid enough to stand without chicken wire (big problem for us as we want to make many panels quickly) and the Acoustisorb is polyester-based, which I haven't read much about in regards to effectiveness. From what I gather most people still prefer fiberglass for pure performance? Thank you for the reply. __________________ www.systematicproductions.com