Quote:
Originally Posted by zenguan88  I also do have a problem :c.
I connect my monitor's to the input of (L/R) in the C-R Out Section. However although there is input coming in, i can see this via the led popping up and down the master level meter, there is no sound coming out from my monitor.
However when i switch my cables to ST OUT sound starts coming out from my monitor :C
why is that so :C! |
Not sure of your setting on your control room settings...
1st Row selects Control Room Speaker Output selection A, B or C you can have 3 Sets of Speakers that you switch between of a 5.1 rig..
2nd Row selects the "Source" of what you want to listen to..
5.1 Bus from Cubase,
DAW main out (mLAN 15&16),
ST Bus (you can also send the DAW to ST bus and adjust it's volume.. 2nd knob above the red ST Fader)
AUX bus
2TR input (you can also send the 2TR to ST bus and adjust it's volume.. 3rd knob above the red ST Fader)
By selecting the correct speaker and the correct source you can monitoe any bus in or out of the n12...
If you are trying to monitor the ST bus, make sure you have it turned on (Button above the red ST Fader)