Quote:
Originally Posted by zenguan88  hi geroge i would like to know if i could connect external devices such as compressor to my yamaha n12. you see i had the yamaha n12, and would had just purchase a pair of Retro Gates STA, how can i route it out to have the compressor on my mix bus, and i would like to record the mod signal back again to my DAW, is there a way for me to do that? could yyou elaborate on this?  |
This from a previous post in the thread....
hi guys - just worked out how to strap a compressor across your master mix using the N12. took a bit of figuring (this machine has amazing depths!) but in case anyone's interested - here's how i did it.
1. make sure nothing in your mix is going to the DAW channel in the N12 (this is output N12 L/R).
2. insert a new stereo track in cubase and set it's input as N12 stereo (N12-ST) and set its output to the DAW channel (N12-L/R).
3. Switch off the switch by the DAW volume pot which sends the signal to the stereo buss.
4. insert a compressor/limiter/eq or whatever on the stereo channel you created and then switch on the live monitor button.
5. on the N12 control room monitor section, switch to the DAW monitor switch - now you can hear the mix with the vst effects you inserted on the stero track you made. switch back to the stereo monitor input to hear it without.
Oh, this is for VST.
Have to think about this in how to use an outboard comp.