Quote:
Originally Posted by Alxi  Not to burst anyone's bubble but i have PT Mpowered and i'm unable to open projects with a greater sample rate then 44.1 My sound card is a delta 66 and it does support 96k... i think it one of the limitations of Mpowered .......but i'm not sure |
PTMP is in general fine with 96k. There's nothing in the software that limits the sample rate. I've used everything from 44.1 up to 192k.
Your problem is a pretty common one. If some other piece of software grabs hold of the M-Audio interface first and sets the sample rate, then PTMP won't be able to override it, and you won't be able to open sessions at other sample rates. One way of forcing it is to open your M-Audio control panel and manually set it before opening PT. This can be a pain in the neck if you've forgotten what sample rate you used for a session.
The usual advice is that the interface should not be your default sound device. From what I've seen, however, some people have trouble even after changing that setting. I'm sure this is your issue, but good luck in tracking it down. Someone over on
the DUC might be able to give you some better advice on how to do that.