Gearslutz.com - View Single Post - Tracking too hot

Electric Goblins · 3rd August 2008

After reading through the boards, I've realized that I may have tracked way too hot. I'm using Logic 8 with RME converters. I was shooting for slightly under "0". Now, after reading all of the posts - - I know better!
If I simply pull the faders down in Logic, will that feed the mix bus a lower signal?
Should I Gain change every channel - - or add a gain change plug per channel?
If this has been discussed could someone post a link?

I'm trying to learn........

Thanks!

3rd August 2008	#1
Electric Goblins Gear interested Joined: Aug 2008 Posts: 3 Thread Starter	Tracking too hot - what is the remedy? After reading through the boards, I've realized that I may have tracked way too hot. I'm using Logic 8 with RME converters. I was shooting for slightly under "0". Now, after reading all of the posts - - I know better! If I simply pull the faders down in Logic, will that feed the mix bus a lower signal? Should I Gain change every channel - - or add a gain change plug per channel? If this has been discussed could someone post a link? I'm trying to learn........ Thanks!