Gearslutz.com - View Single Post - Syncing PT and Logic via MTC and midisport

benhallen · 22nd July 2008

Adam

Thanks for the input. I should have been more clear. I'm running an Apogee Big Ben and Rosetta's on the PT system, in other words, no SYNC I/O. As far as I can tell, there is no way to set PT to be an MTC slave without the SYNC, but maybe I'm wrong.

I can however, select "Using MTC" in the Session Setup under Generator, which is why i was trying to lock Logic to PT instead of the other way around. I'm open to either way. Just need my stems to line up!

b

22nd July 2008	#3
benhallen Gear nut Joined: Jul 2008 Location: Atlanta, GA Posts: 110 Thread Starter	Adam Thanks for the input. I should have been more clear. I'm running an Apogee Big Ben and Rosetta's on the PT system, in other words, no SYNC I/O. As far as I can tell, there is no way to set PT to be an MTC slave without the SYNC, but maybe I'm wrong. I can however, select "Using MTC" in the Session Setup under Generator, which is why i was trying to lock Logic to PT instead of the other way around. I'm open to either way. Just need my stems to line up! b Last edited by benhallen; 22nd July 2008 at 09:53 PM.. Reason: wasn't finished!