Quote:
|
I've also noticed that sometimes when I ping, the ping does not show up on all the tracks, and so latency is not compensated correctly. I have no idea what causes this. I'll keep messing around to hopefully figure that out.
|
This is due to the nature of the "ping" cascading through all the channels so that it can compensate. If you have some turned down too low then the ping will not be able to travel through. I addressed this issue above and suggest inserting a gain plug before the ATA on the master cranked up ONLY when you ping then bypass it before play. Mellowmuse has promised an update with gain control in the plug itself and so this workaround is only temporary.
I've also discovered that you have to turn off any delay or reverb plugs on all channels so that the ping will not be delayed (note that plugs that use cards like the UAD cannot be bypassed totally or the ping will not travel to and from the card. However, you can turn the effect off by using the on/off switch on the GUI)
Also, make sure your ATAs are the first plug inserted.