OK... Some serious problems but I hope they can be resolved. After some initial testing the main issue is with the "Ping" method. This seems to work perfectly in a session where all faders are at unity. However if any fader is below around -11dB or a combination of faders combined are below a certain level then the ping does not get through every channel and the delay is not compensated for. Also, if a plug-in is inserted on a channel that reduces volume (particularly reverbs) then all subsequent channels will not receive "Ping" and therefore, not be compensated. In my testing I found this to be a large issue in normal session fader levels. My work around so far is to bypass reverbs and put all faders at unity while pinging, then undo the fader move so that all channels go to there original positions. This is more then likely a restriction of the "Ping" concept but a more elegant solution within the plug would be greatly appreciated. Also, I received multiple DAE errors while trying to remove ATA plugs or when trying to close a session with ATA plugs.
Gary... I second what a few have said already that I think you could charge more for this plug once the kinks are worked out. Please charge whatever makes it worth your while to continue fighting the good fight and making improvements on this awesome plug! All in all... Nice work!
