Quote:
Originally Posted by Yung  THEAERO..
did you look in my previous post?? there is an exact order of the way stuff should be installed and turned on, to my best of knowledge if the order isnt followed it will not work. as far as the new sp3 drivers., i have not a slightest clue as i dont mind running sp2 to have my 2626 work so they may or may not work i havent had to trouble shoot those drivers.. |
PREVIOUS POST:
Quote:
Yea i thought tha same thing.... goto digidesign and get the updated version of protools... should be ptmp 7.4cs5 (if your protools doesnt read that. thats your problem.) turn off the comp. unplug the 2626 turn the comp back on install the new driver from m-audio. when it ask to shut down after its done installing the driver accept it and while the comp is off plug the 2626 in and turn it on. Now turn on the comp and it should work. |
Yung, just to confirm, are you using a Mac computer with boot camp?
I just reformatted my computer WITH service pack 2. Should i do any updates via windows update, etc? Should I install any other computer drivers first?
From your post this is what ive gathered.
I should have my 2626 plugged in, and get the Pro Tools + CS5 from digidesign.com. Then I should turn off the computer and unplug the 2626. Then turn the computer back on, and install the sp2 driver from m-audio (if you can give me the exact driver version that would be great). Then, I shut off the computer, plug in the 2626, turn it on, then turn on the computer.
I'm ready to do whatever it takes. but ive essentially tried everything and have not gotten it working as of yet.
I still get code 10 - device cannot start.