instead of the 2 device limit with the mlan driver will the mr driver allow for 3 device simultaneously?
mLAN is not a 2 device limit...
Imagine sending 16 outs of the MotifXS into the 01v96's mLAN inputs (no computer inputs used)
Assign the 8 buses of the 01V96 to the Digital inputs of 2 N12s.
01V 4 Bus Outs 1-4 to n12#1 channel input 9-12
01V 4 Bus Outs 5-8 to n12#1 channel input 9-12
STILL NO COMPUTER INPUTS !!
Now connect the 2 n12s as normal (32 Inputs....)
When you toggle the DAW / A.IN button on the channel strip , you are switching between the 1394 input and the Analog Input. If you connect 24 Computer outputs to the channel strips, you will still have 8 outs to send any way you want to the 2 n12s.........
Whew...... That's VERY deep but possible....
We are trying to market the n12 as an easy-to-use
1 to 1 mixer with Cubase, but you see, it can get deep if you are patient and are willing to make your own templates for BOTH the Graphic Patchbay AND Cubase.
By reloading either your whole studio was just rewired with the click of a button.
or it can be a very simple 1-to 1 setup
Part 2
Yes the MR Driver will support
3 devices @ 44.1/48K
2 devices @ 88.2/96K
will there still be a patchbay program?
No parallel Ins and outs
how many inputs will the mr driver allow?
48 @ 44.1/48K
32 @ 96K
will this driver work with the 01v96?
No the MY16mLAN card is not compatible with the MR Driver, but the MR816 has ADAT I/O which CAN work with the 01V96 Built-in ADAT.
another possibilty is a newer mac, adat card in the 01v, and a m-audio lightbridge so i could run m-powered protools if i wanted to.
You can run the MR in stand-alone mode and use the Preamps and send them to the lightbridge....
i have both cubase lights on my n12's but not both sets of transport controls working. they actually did at one point but i have no idea why.
You simply add a second mackie control in your device setup, assign the correct midi in/out.... Done
i would also like to use the 01v's control surface feature via mlan (without the audio) but i haven't thought far enough into how to accomplish this yet.
Don't try mLAN .. The MY is an audio bus, just use USB.. done
I'm exhausted..... That's a deep system....
BTW...
We really appreciate you using Yamaha and will do our best to help you get the most from it.
Thanks...