Gearslutz.com - View Single Post

lazi · 9th July 2008, 05:43 AM

meant to chime in a while ago...

haven't had much time with them but i have both of my n12's up and running. i also have a 01v96 and xs6 both with the mlan cards. i haven't put the xs6 in the mix just yet but the amount of options is staggering. the fact that i can keep them all hooked up and just change my routing via the software is very nice. currently just the n12's but i did try a setup with the 01v96 and n12 as my input devices and the n12's as my output devices. hotness!!! still will want more inputs as quite a few pieces of my gear have multiple outs which i will want to use. well over 32...

so as i keep going my questions right now are if instead of the 2 device limit with the mlan driver will the mr driver allow for 3 device simultaneously and will there still be a patchbay program? how many inputs will the mr driver allow? will this driver work with the 01v96? i think that was answered a few posts back but i'm hopeful. i guess it'll still be nice to have the (2) n12's and the xs6 running together anyways so things are looking good. if the 2 n12's and mr are possible then i may get the mr and use 01v96 to send adat. another possibilty is a newer mac, adat card in the 01v, and a m-audio lightbridge so i could run m-powered protools if i wanted to.

i was tempted by logic but once i saw the integration between the n12's and cubase 4 i'm back on board. i have both cubase lights on my n12's but not both sets of transport controls working. they actually did at one point but i have no idea why. i would also like to use the 01v's control surface feature via mlan (without the audio) but i haven't thought far enough into how to accomplish this yet. i also haven't quite gotten a grip on the wet feature. i also hope the work mode buttons become user programmable at some point.

wish the n12's had a plate to attach them together. will probably drill out a plate that can attach to existing screws on the bottoms. i'd hate to just stick with velcro and leave a gap. will see....

and to top it off i will soon have my msp7's set up for 5.1. loving everything so far.

9th July 2008, 05:43 AM	#1400
lazi Gear Head Join Date: Dec 2007 Posts: 70	meant to chime in a while ago... haven't had much time with them but i have both of my n12's up and running. i also have a 01v96 and xs6 both with the mlan cards. i haven't put the xs6 in the mix just yet but the amount of options is staggering. the fact that i can keep them all hooked up and just change my routing via the software is very nice. currently just the n12's but i did try a setup with the 01v96 and n12 as my input devices and the n12's as my output devices. hotness!!! still will want more inputs as quite a few pieces of my gear have multiple outs which i will want to use. well over 32... so as i keep going my questions right now are if instead of the 2 device limit with the mlan driver will the mr driver allow for 3 device simultaneously and will there still be a patchbay program? how many inputs will the mr driver allow? will this driver work with the 01v96? i think that was answered a few posts back but i'm hopeful. i guess it'll still be nice to have the (2) n12's and the xs6 running together anyways so things are looking good. if the 2 n12's and mr are possible then i may get the mr and use 01v96 to send adat. another possibilty is a newer mac, adat card in the 01v, and a m-audio lightbridge so i could run m-powered protools if i wanted to. i was tempted by logic but once i saw the integration between the n12's and cubase 4 i'm back on board. i have both cubase lights on my n12's but not both sets of transport controls working. they actually did at one point but i have no idea why. i would also like to use the 01v's control surface feature via mlan (without the audio) but i haven't thought far enough into how to accomplish this yet. i also haven't quite gotten a grip on the wet feature. i also hope the work mode buttons become user programmable at some point. wish the n12's had a plate to attach them together. will probably drill out a plate that can attach to existing screws on the bottoms. i'd hate to just stick with velcro and leave a gap. will see.... and to top it off i will soon have my msp7's set up for 5.1. loving everything so far.