|
Is what I would need is a unit with 16 inputs and those 16 inputs are hardwired to the 16 outputs without any coloration (essentially they would be thru channels). and then between those input and outputs i need an split off on each channel and what it would split off to is a routing system. You would control the routing on the front panel, each channel would have 4 knobs which would be the sends. to activate a send you push in the knob and turn for send level. There could also be a master section to control main monitor mix levels and you could even insert it onto the sends.
You would put this unit right before your AD/DA conversion. Example of unaffected chain:
Vocal Mic -> Preamp -> "The Unit" channel 1 -> Straight out channel 1 with no coloration/distortion -> AD/DA channel 1.
Example of split off point:
...."The Unit" channel 1 -> Straight out channel 1....
____________________|
____________________|
___________________.\/
____________________Routing Bus ---> Send 1 engaged --> Send 1 out--->Headphone Box--->Vocalists headphones
And this could be useful if you have a console as well because you would no longer have to use your consoles sends. You could have another unit for your DA conversion as well and link the two together.
Anything like this out there?
|