Gearslutz.com - View Single Post

Killahurts · 15th May 2008, 12:33 PM

Thanks David.

I was reading the paper manual before, there seems to be much more info in the docs on the software CD, so all is good.

Apparently, I have to move my LAN connection to ethernet port 2 if I want to setup the MC with it's own router, as it must be on port 1.

That's why I wanted to start out by just hooking it up to my existing switch, but that would add another layer of troubleshooting if I run into problems, so...

When I get it working, I'm going to try it with Logic, DP, and FCP.

15th May 2008, 12:33 PM	#416
Killahurts Lives for gear Join Date: Jun 2002 Location: USA Posts: 1,259	Thanks David. I was reading the paper manual before, there seems to be much more info in the docs on the software CD, so all is good. Apparently, I have to move my LAN connection to ethernet port 2 if I want to setup the MC with it's own router, as it must be on port 1. That's why I wanted to start out by just hooking it up to my existing switch, but that would add another layer of troubleshooting if I run into problems, so... When I get it working, I'm going to try it with Logic, DP, and FCP. __________________ Light is the fastest thing in Texas - My 4-year-old daughter.