Gearslutz.com - View Single Post - Newb Q: solder won't adhere to switch case

Chae Ham · 16th September 2004

Also make sure the area is clean.
Especially if you've "greased" it up by touching and rubbing the area too much with your hands.

16th September 2004	#5
Chae Ham Gear maniac Joined: Nov 2002 Location: MD Posts: 174	Also make sure the area is clean. Especially if you've "greased" it up by touching and rubbing the area too much with your hands. __________________ Chae H. Ham Prodigy Engineering