Gearslutz.com - View Single Post

Trailerman · 15th September 2004

We're about to add an HD3 Accel setup to our studio, running on PC. I'm trying to get some information on which motherboards people are successfully using for this kind of rig.

In particular, has anybody had any luck with a Supermicro X5DA8 or other motherboards using the Intel E7505 chipset. This chipset is used on the two Digidesign certified systems, but I've seen at least one person have problems with it on a custom-built system.

If anybody has any input, advice, assistance, I'd be extremely grateful.

Many thanks

Jules

15th September 2004	#1
Trailerman Gear maniac Joined: Sep 2004 Location: Manchester, UK Posts: 194 Thread Starter	PC Motherboards for ProTools HD3 Accel We're about to add an HD3 Accel setup to our studio, running on PC. I'm trying to get some information on which motherboards people are successfully using for this kind of rig. In particular, has anybody had any luck with a Supermicro X5DA8 or other motherboards using the Intel E7505 chipset. This chipset is used on the two Digidesign certified systems, but I've seen at least one person have problems with it on a custom-built system. If anybody has any input, advice, assistance, I'd be extremely grateful. Many thanks Jules