Gearslutz.com - View Single Post

RickZ · 17th April 2008

Westmalle,

Did you use Audiogate to convert from DSD to PCM ?

I see there is a Gain control, but it doesn't respond. I too have DSD that went over, but had earlier converted to 96/32BitIEEEFloat, and the over wasn't really over, and applying gain reduction on the 96/32 worked fine, no audible problems. It would be convenient to dial in a gain reduction in Audiogate, and have the PCM file under 0 dB, but I can't figure out how to do that.

TIA,
Rick Z

17th April 2008	#5
RickZ Gear nut Joined: Aug 2007 Location: Hershey, PA Posts: 96	Westmalle, Did you use Audiogate to convert from DSD to PCM ? I see there is a Gain control, but it doesn't respond. I too have DSD that went over, but had earlier converted to 96/32BitIEEEFloat, and the over wasn't really over, and applying gain reduction on the 96/32 worked fine, no audible problems. It would be convenient to dial in a gain reduction in Audiogate, and have the PCM file under 0 dB, but I can't figure out how to do that. TIA, Rick Z __________________ We engineers are not the artists, we are the capturers of the artist's output. - Plush 3/11/08