[DAWgEAR]

Scott,

I have tried going back to firmware 20/driver 1.30 build 057g as per recommendation from Lynx but the symptoms remain unchanged. Is there a different specific driver you would recommend I try?

I'm at the point where I am going to build or buy a new system soon. I've always built my own and didn't figure I'd buy a system, but I've been looking at your site a lot lately ...

The pages where you can customize systems on your site do not offer multiple UAD-1s to be selected. I'm looking at the Other Soft/DSP drop down menu.

Do you have experience building multiple UAD-1 systems that are free of the exact symptoms I have described? I am not asking you to reveal your trade secrets, but I would just like to know if it is even possible.

I don't mean any offense by what I just typed, but my system is not an uncommon one and it has been wonderfully stable (it still is except for what I described) for the two years I have had it. Six months ago, before I knew what was happening, I would have said my system was rock solid. However it was relatively recently that I discovered what was going on and that it has affected every recording I have ever made for the past couple of years.

I say that because so far nobody has indicated that they have tried successfully or unsuccessfully to replicate my procedure 1 and/or 2. I'm wondering if it is specific to just my system, or if others have it too but are are unaware that this problem is going on.

Have you explicitly tried the procedures I outlined?