Gearslutz.com - View Single Post

bitman · 7th April 2008

Well I've gone and done it.
I purchased a DCT-FUTA1 from VirtuaVia.
I have determined that a full size PCI UAD-1 card will NOT extend outside the extents of a standard clone PC case. - That's my story and I am sticking to it until the card arrives and I am proven wrong. The photo below is nearly 1:1 To my calculations and a measuring tape, the UAD-1 will stick up 5 inches give or take a half an inch from the motherboard with 1.5 inches to spare. As far an securing the UAD-1 card, I'll Mcgiver whatever is necessary.

I'll let you all know how it goes.

:Ron

7th April 2008	#21
bitman Lives for gear Join Date: Apr 2007 Location: Keystone, CO Posts: 1,497	Well I've gone and done it. I purchased a DCT-FUTA1 from VirtuaVia. I have determined that a full size PCI UAD-1 card will NOT extend outside the extents of a standard clone PC case. - That's my story and I am sticking to it until the card arrives and I am proven wrong. The photo below is nearly 1:1 To my calculations and a measuring tape, the UAD-1 will stick up 5 inches give or take a half an inch from the motherboard with 1.5 inches to spare. As far an securing the UAD-1 card, I'll Mcgiver whatever is necessary. I'll let you all know how it goes. :Ron