Now that I have picture, I checked sync after using Audiosuite Timeshift (Film to NTSC -.1% down) it DID NOT LINE UP the same way using the SYNC I/O did to pull down the session. So a
WARNING to everyone: DO NOT USE AUDIOSUITE TO DO POST FORMAT CONVERSIONS!!! IT'S NOT ACCURATE ENOUGH!!! - for an 18 minute reel, Audiosuite was off more than 5 frames from picture stop. Instead, use import session data feature that joe milner describes:
Quote:
Hi,
if you're using Pro Tools, it's easy. You just need to convert your stuff from film speed to video speed.
I'm assuming that your stems & printmasters are on tracks in a session that is 29.97, .1% pulled down. Make a new session at 29.97, no pulldown. "Import Session Data" and check the "Use SRC" (I think it's called) box, and select the source sample rate as 47952 (or 44056 if you're at 44.1), and use "Best" quality. Select the tracks you want to import, and go have some coffee. Done and Done.
|